open menu navs close menu navs

Discontinued Glass Kiln Product Manuals

Original Set-Pro Operators Manual

Introduced in 2002, the Set-Pro was Evenheat's first 3 button digital control. Production of the original Set-Pro ended in Feb 2011 with the introduction of Express Mode programming. Use this manual for all Set-Pro equipped kilns with serial numbers 102076 and below and/or not ending in EX.

Download Manual
Evenheat PDF Icon

RampMaster II Operators Manual

The RM II was introduced in 1998 and were no longer offered on glass kilns in the Fall of 2005. These are the complete, detailed operating instructions. When the bare essentials won't do, use this manual.

Download Manual
Evenheat PDF Icon

RampMaster (Original) Operators Manual

Models HDTP-56-8 & HDTP-56-55 - The Original RampMaster (RM) was introduced around 1992 and was used until 1999, primarily on glass firing kilns. The original contained 8 segments. An upgraded version containing 55 segments was introduced around 1996. This manual is used for both versions.

Download Manual
Evenheat PDF Icon

Addendum to RampMaster (Original) (55 segment) Operators Manual

Model HDTP-56-55 - The introduction of the 55 segment RampMaster required an addendum to the original manual. If you have the 55 segment RampMaster you'll need this addendum. Production of the Upgraded RampMaster was ended in 1999.

Download Manual
Evenheat PDF Icon

Perfect Fire Operators Manual

Model DTP-56 - The Perfect Fire (PF) is a single set point temperature control which was in production from 1992 to 1999, primarily on ceramic, pottery and porcelain firing kilns. This manual was included with all new PF kilns.

Download Manual
Evenheat PDF Icon

Addendum to Perfect Fire Operators Manual

The Perfect Fire was modified with additional features in 1998. Production ended in 1999. This version of the control is identified by an "On/Off" switch located directly on the control faceplate. This addendum covers the changes that were made.

Download Manual
Evenheat PDF Icon

DTC 100C Operators Manual

Introduced in 1988, the DTC 100C was Evenheat's first digital control. Production on the DTC 100C was ended in 1992.

Download Manual
Evenheat PDF Icon