Discontinued Knife/Heat Treat Oven Product Manuals
Original Set-Pro Operators Manual
Introduced in 2002, the Set-Pro was Evenheat's first 3 button digital control. Production of the original Set-Pro ended in Feb 2011 with the introduction of Express Mode programming. Use this manual for all Set-Pro equipped kilns with serial numbers 102076 and below and/or not ending in EX.
RampMaster II Operators Manual
The RM II was introduced in 1998 and were no longer offered on glass kilns in the Fall of 2005. These are the complete, detailed operating instructions. When the bare essentials won't do, use this manual.
RampMaster (Original) Operators Manual
Models HDTP-56-8 & HDTP-56-55 - The Original RampMaster (RM) was introduced around 1992 and was used until 1999, primarily on glass firing kilns. The original contained 8 segments. An upgraded version containing 55 segments was introduced around 1996. This manual is used for both versions.
Addendum to RampMaster (Original) (55 segment) Operators Manual
Model HDTP-56-55 - The introduction of the 55 segment RampMaster required an addendum to the original manual. If you have the 55 segment RampMaster you'll need this addendum. Production of the Upgraded RampMaster was ended in 1999.
Perfect Fire Operators Manual
Model DTP-56 - The Perfect Fire (PF) is a single set point temperature control which was in production from 1992 to 1999, primarily on ceramic, pottery and porcelain firing kilns. This manual was included with all new PF kilns.
Addendum to Perfect Fire Operators Manual
The Perfect Fire was modified with additional features in 1998. Production ended in 1999. This version of the control is identified by an "On/Off" switch located directly on the control faceplate. This addendum covers the changes that were made.
DTC 100C Operators Manual
Introduced in 1988, the DTC 100C was Evenheat's first digital control. Production on the DTC 100C was ended in 1992.