Discontinued Ceramic Kiln Product Manuals
DTC 100C Operators Manual
Introduced in 1988, the DTC 100C was Evenheat's first digital control. Production on the DTC 100C was ended in 1992.
Fyrematic Operators Manual
The Fyrematic is simply a devise that increases kiln temperature. If you own a Fyrematic and don't have the operators manual you'll need it. Production of the Fyrematic Series ended in 2007.
Perfect Fire Operators Manual
Model DTP-56 - The Perfect Fire (PF) is a single set point temperature control which was in production from 1992 to 1999, primarily on ceramic, pottery and porcelain firing kilns. This manual was included with all new PF kilns.
Addendum to Perfect Fire Operators Manual
The Perfect Fire was modified with additional features in 1998. Production ended in 1999. This version of the control is identified by an "On/Off" switch located directly on the control faceplate. This addendum covers the changes that were made.
RampMaster (Original) Operators Manual
Models HDTP-56-8 & HDTP-56-55 - The Original RampMaster (RM) was introduced around 1992 and was used until 1999, primarily on glass firing kilns. The original contained 8 segments. An upgraded version containing 55 segments was introduced around 1996. This manual is used for both versions.
Addendum to RampMaster (Original) (55 segment) Operators Manual
Model HDTP-56-55 - The introduction of the 55 segment RampMaster required an addendum to the original manual. If you have the 55 segment RampMaster you'll need this addendum. Production of the Upgraded RampMaster was ended in 1999.
RampMaster II Operators Manual (1998 to Fall 2005)
The RM II was introduced in 1998. These are the complete, detailed operating instructions. When the bare essentials won't do, use this manual.
TnB Operators Manual
This unique automatic control requires a basic understanding that is well covered in this manual. Production of the TnB Series ended in 2007.