Porcelain/China Kiln Firing Glossary
A fired piece of unglazed clay.
Color (stain) that is applied to bisque and does not require firing.
High quality porcelain.
Section added to a kiln for additional height.
Used in a kiln, a pyrometric cone deforms when the proper heatwork is achieved. Various cones are made to either trigger mechanical shut off's (Dawson Kiln Sitter) or to act as a witness to kiln conditions.
Needed for support by some pyrometric witness cones. While still a valid method of securing witness cones, Evenheat prefers the use of a "self-supporting" witness cone, which needs no cone holder.
Broken bubbles in glazed surfaces. Usually indicates underfiring.
Small hairline cracks in glazed surfaces.
A picture or design transferred to a finished glaze and fired.
Removing glaze from the bottom of ware to eliminate stilting. Eliminates glaze from sticking to the shelf.
High temperature coils inside the kiln that produce the heat.
Process of heating the ware inside a kiln until matured.
A collective term for the various posts and shelving used to support and separate the ware within the kiln chamber.
A thin, smooth coating of ground glass, suspended in a liquid, applied to bisque or greenware which produces a hard glass-like surface when fired.
Unfired clay objects.
The combined measure of time and temperature. Both time or speed of the firing along with the final temperature determine the amount of heatwork accomplished. Pyrometric cones deform at particular heatwork values.
An oven or furnace which produces very high temperatures.
A mechanical device that shuts the kiln off when a small pyrometric cone receives the proper amount of heatwork.
A protective coating used to keep glazes from sticking to the kiln floor and shelves.
A back up device for the kiln sitter. The limit timer shuts the kiln off, using a timer motor, in the event of a kiln sitter failure.
An overglaze, when applied to a glazed surface, that produces a radiant and brilliant effect. For example : mother of pearl.
When ware and glazes have reached their proper heatwork.
As a verb: to shape clay. As a noun: a plaster form that liquid clay slip is poured into to manufacture greenware.
Greenware that can be stacked only during a low fire bisque firing.
Glaze applied to greenware and fired once.
Any decoration that is applied over a glazed surface and fired.
Openings in the side of kilns for ventilation and visual inspection of the kiln during firing.
Small holes in the glazed surface of the ware after firing.
A clay body that requires a high fire to become vitreous.
Refractory material used to support shelves at different heights inside the kiln.
The pyrometer is a meter that indicates high temperatures. In order to work, a pyrometer must have a thermocouple (temperature sensor) connected to it.
A high temperature material.
Sometimes referred to as plates. Refractory slabs used to support ware inside the kiln. This enables the entire kiln to be utilized.
Material used in making kiln wash. Silica sand is used for propping porcelain.
Liquid clay that is poured into molds to produce greenware.
Holding the kiln temperature at a desired temperature. Is also referred to as "dwell" time.
Single or multi-pointed supports that are used to keep the ware from having contact with the shelves during a glaze firing. This eliminates the ware from adhering to the shelves.
A high fired ceramic body which is vitreous, not translucent and usually made of native clays.
Ware that has cracked after removing it from the kiln. Usually caused by removing ware while it's too hot.
The temperature sensing probe of a pyrometer. It's inserted into the kiln chamber to measure temperature.
Colored slip which is applied directly to the greenware.
Allowing moisture and gases to escape from the kiln during firing.
A hard, nonporous surface.